Max Cut polishing pad

The Max Cut pad is our controlled starting combination for most paint finishes. It combines strong correction with a clean polishing result. The reticulated foam retains its shape even as heat builds up. Always start with a test spot.

1. Prepare Centre the pad on the backing plate and apply Max Cut compound sparingly.
2. Polish Work in overlapping passes with a dual action or rotary polisher. Monitor pressure and temperature.
3. Clean and inspect Blow out the pad regularly and check the result. Refine with Perfect Finish if needed.

If the cut is insufficient on very hard paint or GRP, switch to Ultra Cut.

Technical specifications

Performance

Strong cut

Application

Defect correction on most automotive paint finishes

Material

Reticulated, open-cell quality foam that retains its shape

Shape

Precision-cut trapezoidal shape with centre hole

Machines

Dual action and rotary

Recommended polish

Max Cut compound

Sizes

30, 50, 80, 125 and 150 mm

Manufacture

Made in Germany

Care

1. Blow out Remove residue regularly during use.
2. Clean Clean with lukewarm water and pH-neutral shampoo. Do not use aggressive cleaners.
3. Dry Allow to air dry and store in a clean, dry place.